Sony CPD-220GS - Manual (Page 8)

Customizing Your Monitor
Before adjusting
• Connect the monitor and the computer, and turn them on.
• Select " B (LANGUAGE)" in the OPTION OSD, then
select "ENG" (English) (see page 15).
Introducing the On-screen
Display System
Most adjustments are made using the MENU OSD.
Adjusting the Picture Brightness
and Contrast
Once the setting is adjusted, it will be stored in memory for
all input signals received.
1 Press the O- (brightness) 4/4^ or G (contrast)
buttons.
The BRIGHTNESS/CONTRAST OSD appears.
BRIGHTNESS/CONTRAST
□
□ 26 0 D 26
a
2 For brightness adjustment
Press the buttons.
't'... for more brightness
for less brightness
For contrast adjustment
Press the ^ buttons.
. for more contrast
,. for less contrast
The OSD automatically disappears after about 3 seconds.
To reset, press the RESET button while the OSD is on. The
brightness and contrast are both reset to the factory settings.
8
MENU OSD
Press the MENU button to display the MENU OSD.
This MENU OSD contains links to the other OSDs described
below.
□ ' C3> _
ICQLQRl CENTEPi bCREEtJ
{4]
m
. «1
SOUND
e
.SIZE.
e -1
lOPTION
60.0kHz/ 85Hz ^
Horizontal Vertical
Frequency* Frequency*
[3 S COLOR
Displays the COLOR OSD for adjusting the color
temperature.
[H CENTER
Displays the CENTER OSD for adjusting the centering
of the picture.
[3] (HD SCREEN
Displays the SCREEN OSD for adjusting the vertical
and horizontal convergence, etc.
0 ^ ZOOM
Displays the ZOOM OSD for enlarging and reducing
the picture. ‘
[5] e OPTION
Displays the OPTION OSD for adjusting the OSD
position, degaussing the screen, selecting the OSD
language, etc.
[g B ■ SIZE
Displays the SIZE OSD for adjusting the picture size.
[7] <1 SOUND
Displays the SOUND OSD for adjusting the sound.
[g U GEOM
Displays the GEOMETRY OSD for adjusting the picture
rotation and pincushion, etc.
[g EXIT
Closes the MENU OSD.
* The horizontal and vertical frequencies for the received input
signal appear beneath the MENU OSD.