Sony CPD-220GS - Manual (Page 11)

Customizing Your Monitor
Using the ZOOM On-screen
Display
The ZOOM settings allow you to enlarge or reduce the
picture.
Once the setting is adjusted, it will be stored in meinory for
the current input signal.
1 Press the MENU button.
The MENU OSD appears.
2 Press the and buttons to select
" ^ ZOOM,” and press the MENU button again.
The ZOOM OSD appears.
&■
□ 26
□ 73
3 Press the 3>“/^buttons to adjust the picture zoom.
... to enlarge the picture
' . . . to reduce the picture
The OSD automatically disappears after about 30 seconds.
To close the OSD, press the MENU button again.
To reset, press the RESET button while the OSD is on.
Using the COLOR On-screen
Display
You can change the monitor's color temperature. For
example, you can change the colors of a picture on the
screen to match the actual colors of the printed picture.
Once the setting is adjusted, it will be stored in memory for
all input signals received.
1 Press the MENU button.
The MENU OSD appears.
2 Press the ICi 'f/♦ and buttons to select
COLOR,” and press the MENU button again.
The COLOR OSD appears.
If you are using Graphic Picture Enhancement (GPE)
If you are in one of the GPE modes, the following
COLOR OSD appears when " @ COLOR" is selected.
[£
□
□ 26 □
Note
The picture zoom adjustment will stop as soon as either the
horizontal or vertical size reaches its maximum or minimum value.
This OSD allows you to reduce the color temperature
from 11,OOOK to 9,300K. Press the buttons to
adjust the color temperature.
For more information on using GPE, see "Selecting the
Graphic Picture Enhancement (GPE) Mode" on page 16.
(continued)
11