Sony CPD-220GS - Manual (Page 14)

Customizing Your Monitor
You can change the OSD position (for example, when you
want to adjust the picture behind the OSD).
1 Press the MENU button.
The MENU OSD appears.
2 Press the D and buttons to select
“ S OPTION,” and press the MENU button again.
The OPTION OSD appears.
3 Press the buttons to select
“ g (OSD H POSITION)” or “ g (OSD V POSITION)”.
Select " g (OSD H POSITION)" to adjust the horizontal
position.
OSD H POSITION
Select " g (OSD V POSITION)" to adjust the vertical
position.'
4 Press the buttons to move the OSD to the
desired position.
The OPTION OSD automatically disappears after about 30
seconds.
To close the OSD, press the MENU button again.
To reset, press the RESET button while the OSD is on.
14
l • » ' 1 f-i
The control lock function disables all of the buttons on the
front panel except the Cl) (power) switch and MENU button.
1 Press the MENU button.
The MENU OSD appears.
2 Press the D 4'/^^ and buttons to select
" S OPTION," and press the MENU button again.
The OPTION OSD appears.
MANUAL DEGAUSS
3 Press the buttons to select ”Om (CONTROL
LOCK)".
4 Press the buttons to select "ON”.
The OPTION OSD automatically disappears after about 30
seconds.
To close the OSD, press the MENU button again.
Once you select "ON," you cannot select any items except
"EXIT" and " S OPTION" in the MENU OSD.
If you press any button other than the (!) (power) switch and
MENU button, the Om rnark appears on the screen.
To cancel the control lock
Repeat steps 1 through 3 above and press the
buttons to select "OFF".