Sony RM-PP402 - Manual (Page 7)

m Numeric buttons (1 to 0)
Inputs the corresponding numeric value. When
inputting a channel, disc, or track number, 0 selects 10.
Ill ENTER D.TUNING button
If you have selected tuner
Press to enter direct tuning mode.
If you have selected VCR, DVD player, LD player,
TV, satellite tuner, tape deck, MD deck, or CD
player:
After selecting a channel, disc, or track using the
numeric buttons, press to enter the value.
[ll Tape/disc operation buttons
The following table describes the component operated
by each button and the function of the buttons.
Button(s) Component(s) Function
◄ Tape deck Starts play on the reverse
side of the cassette
► VCR, DVD player,
LD player, tape deck,
MD deck, CD player,
DAT deck Starts play on the front
side of the cassette
II VCR, DVD player,
LD player, tape deck,
MD deck, CD player,
DAT deck Pauses play or recording
or starts recording when
the component is in
recording standby
■ VCR, DVD player,
LD player, tape deck,.
MD deck, CD player,
DAT deck Stops play
VCR, DVD player,
LD player, MD deck,
CD player, DAT deck Skips tracks
VCR, LD player, tape
deck, MD deck, DAT
deck Fastwinds or rewinds
DVD player, CD
player Searches tracks in the
forward or backward
direction
Button(s) Component(s) Function
• tape deck, MD deck,
DAT deck Sets the tape deck in
recording standby
• + ► (if
pressed
together) VCR, Tape deck, DAT
deck Starts recording. You
can press for the tape
deck or DAT deck
instead of ►.
DISC CD player Selects a disc (CD player
with a multi-disc
changer only)
D.SKIP CD player Skips a disc (CD player
with a multi-disc
changer only)
See the table on page 10 for information on the buttons
that you can use to control each component.
07 |
CH/PRESET +/- buttons
Press repeatedly to select a preset station or channel.
m SOUND FIELD A.F.D. button
Press to set the receiver to automatically select the
appropriate sound field for the input signal.
This button can be used only with receivers that have
digital inputs.
SOUND FIELD 2CH/OFF button
Press to turn the sound field off and listen to 2 channel
stereo sound.
m MODE +/- buttons
Press to select sound fields.
ft»
ft)
3
a
CO
ftp
30
ft
3
o
ft
o
■0 ft