Recording on an md, Monitor audio during recording – Sony MDS-JE700 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Basic Operations
Recording on an MD
Monitor audio during recording
Even if you set REC MODE to
MONO, the monitor signal does
not become monaural.
1
8 6 5 4
Turn on the amplifier and play the program source you want to
record.
Press POWER.
The POWER indicator changes from red to green.
Insert a recordable MD.
With the arrow
pointing this way
If the MD has a recorded material on it, the deck will
automatically start recording from the end of the last recorded
track.
Set INPUT to the corresponding input connector.
To record through
Set INPUT to
DIGITAL OPTICAL INI
' OPTI
DIGITAL OPTICAL IN2
OPT2
DIGITAL COAXIAL IN
COAX
LINE (ANALOG) IN
ANALOG
Set REC MODE to the mode you want to record in.
To record in
Set REC MODE to
Stereo sound
STEREO
Monaural sound*
MONO
In the monaural recording, you can record about two times longer than in
the stereo recording.
(Continued)