Sony CDX-C660 - Manual (Page 8)

Adding tracks to a program
1 Press ( SHIFT), then press (D (PLAY
' MODE) for two seconds.
CD . » I I I I M l » / ,
4:P1 .03;
-*■ r
"P 1 " shows Program 1 is selected.
To select Program 2, press (J) (“►)
repeatedly until "P 2" appears.
2 Press CD (♦—) or CD (—►) to select the
track slot number where you want to
insert a track.
Track slot number
CD .............. I'll
:2 PI
•^ t-im M.I M M4)i
№
3 Press either side of ( seek / ams ~) to select
^ the track you want to insert.
4 Press CD (ENTER) momentarily to enter
the track.
The current track in that slot number and
the succeeding tracks shift down.
5 To continue inserting tracks, repeat steps
2 through 4.
Note
Once all 12 slots have been filled, "*Mem Full*"
appears in the display, and you cannot insert tracks.
6 When you finish inserting tracks, press
CD (PLAY MODE) for two seconds.
7 Press (SHIFT).
Erasing tracks in a program
1 Press (SHIFT), then press (D (PLAY
MODE) for two seconds.
CD •<»» V.M I M 1111/,,
7:P1 .08;
"P 1" shows Program 1 Is selected.
To select Program 2, press CD (—*)
repeatedly until "P 2" appears.
2 Press CD (♦—) or CD (—►) to select the
track you want to erase.
Track slot number
CD vU " 11111 'llLU
:3 PI -ii
.«»lurimuiiim
The track currently registered in slot 6 of
Program 1.
3 Press CD (ENTER) for two seconds.
When you erase a track from a slot number,
the succeeding tracks shift up to fill the gap.
DEL
------ P I . 0 6
CD
7 P I . 0 6
4 To continue erasing tracks, repeat steps
2 and 3.
5 When you finish erasing tracks, press CD
(PLAY MODE) for two seconds.
6 Press (SHIFT).
8