Sony CDX-C660 - Manual (Page 18)

■MP3'
Labeling a CD — Disc Memo
(CD changer with the custom file function)
You can label each disc with a personalized
name. You can enter up to eight characters for
a disc. If you label a CD, you can locate the
disc by name and select the specific tracks for
playback (page 19).
1 Play the CD and press CusT^ for two
seconds.
CD2
1 -
2
Enter the characters.
O Rotate the dial clockwise to select the
desired characters.
... +
CD2
If you rofate the dial counterclockwise,
the characters appear in the reverse
order.
If you want to put a blank space
between characters, select (under­
bar).
0 Press (T) (—►) after locating the
desired character.
The flashing cursor moves fo fhe next
space.
CD2
T
If you press Q3 (<—), the flashing cursor
moves fo the left.
0 Repeat steps O and 0 to enter the
entire name.
3 To return to normal CD playback mode,
press ( LIST ) for two seconds.
Tip
To eraselconect a name enter
(under-bar) for each
character.
Displaying the disc memo name
Press ( DSPL) during CD playback.
CD2
SCHUBERT
Each time you press ( DSPL) during CD
playback, the item changes as follows:
Elapsed playback time «—* Disc name
Erasing the disc memo
1 Press (SOURCE) repeatedly to select CD.
2 Press (MODE) repeatedly to select the CD
changer.
3 Press ( LIST) for two seconds.
4 Press (DSPL) for two seconds.
5 Rotate the dial to select the name you
want to erase.
6 Press (X) (ENTER) for two seconds.
The name is erased.
Repeat steps 5 and 6 if you want to erase
other names.
7 Press ( LIST) for two seconds.
The unit returns to normal CD playback
mode.
Locating a disc by name
— List-up (CD changer with the custom file
function or MD changer)
You can use this function for discs that have
been assigned a custom name. For more
information on disc names, refer to "Labeling a
CD."
1 Press ( LIST) momentarily.
The name assigned to the current disc
appears in the display.
LST
1 SCHUBERT
2 Press ( LIST ) repeatedly until you find the
desired disc.
18
3 Press (5) (ENTER) to play back the disc.