Sony CDX-C660 - Manual (Page 16)

Creating a program
— Program Memory (CD/MD changer with
the program memory function)
You can play tracks in the order you want by
making your own program. You can make two
programs: Program 1 and Program 2. You can
select up to 12 tracks for each program. You
can store the programs in memory.
1 Press (SHIFT), then press (13 (PLAY
MODE) for two seconds.
Program edit mode
CD2 TRACK
3 jPl .01:
"P 1" shows Program 1 is selected.
If you have labelled the disc, the bank edit
mode appears. Press d) (PLAY MODE) to
display "P 1" above.
To select Program 2, press (T) {—*)
repeatedly until "P 2" appears.
2 Select the track you want.
O Press (SOURCE) repeatedly to select
CD or MD.
O Press (MODE) repeatedly to select the
changer.
e Press (SHIFT), then press the number
button to select the disc.
O Press (SHIFT).
O Press either side of ( seek / ams ) to
select the track.
3 Press d3 (ENTER) momentarily.
PI
+Entar+
CD2 suniMiM,
3 2:P1.02:
_______________ P.A.MODE -» l i m i n e
4 To continue entering tracks, repeat steps
2 and 3.
5
When you finish entering tracks, press
(D (PLAY MODE) for two seconds. -
6 Press (SHIFT).
Notes
• appears in the display while the unit is reading
the data, or when a disc has not been put into the unit.
• ‘‘*Mem Full*'' appears in the display when you try to
enter more than 12 tracks into a program.
Playing the stored program
Changing the disc order in the changer will not
affect program memory play.
You can select:
•PGM 1 to play Program 1.
•PGM 2 to play Program 2.
•PGM 1+2 to play Programs 1 and 2.
1 Press (SHIFT).
2 Press d) (PLAY MODE) repeatedly until
"PGM" appears.
3 Press (T) (— ►) repeatedly until the
desired program appears.
I—► PGM 1---------- '*■ PGM 2 ---------- ► PGM 1+2 -1
I------------------------- PGM off ◄----------------------------- 1
Program Play starts.
4 Press (SHIFT).
To go back to normal playback mode, select
"PGM off" in step 3 above.
Notes
• If you press the number button during program memory
play, program memory play is interrupted, and playback
of the selected disc starts.
• "NO Data" appears in the display if no track is stored in
the program.
• If a track stored into the program memory is not in the
disc magazine, the track will be skipped.
• When the disc magazine contains no tracks stored into
the program memory, or when the program information
has not been loaded yet, "Not Ready" appears.
Erasing an entire program
1 Press (SHIFT), then press d) (PLAY
MODE) for two seconds.
CD2 m ..................... ..
7:P1 .08:
M M 1 I H
"P 1" shows Program 1 is selected.
If you have labelled the disc, the bank edit
mode appears. Press (D (PLAY MODE) to
display "P 1" above.
2 Press (T) (•—) repeatedly until "DEL"
appears.
16
DEL v^unmnnm//
PGMl—:
____ PLArfetd
t - M I
lEhtol
H H