Sony CDX-C660 - Manual (Page 17)

To erase Program 2, press (3) (—►)
repeatedly until "PGM 2" appears.
3 Press.® (ENTER) for two seconds.
Erasing tracks in a program
1
Press (SHIFT), then press ® (PLAY
MODE) for two seconds.
PI
NQ Data
CD2 ~ »»
3 2:P1 .07-
_____ »«YMoac -»
The entire program is erased.
4 When you finish erasing programs, press
® (PLAY MODE) for two seconds.
5 Press (SHIFT).
Adding tracks to a program
1 Press ((SHIFT), then press ® (PLAY
MODE) for two seconds.
"P 1" shows Program 1 is selected.
If you have labelled the disc, the bank edit
mode appears. Press (® (PLAY MODE) to
display "P 1" above.
To select Program 2, press ® (—►)
repeatedly until "P 2" appears.
2 Press ® (■«— ) or ® (— ►) to select the
track you want to erase.
Track slot number
CD2
«5.= ............................................................
rri2 .....................iiiu
4 7jP1.08;
P lay MODE E
'
:3 3 PI .l06li
—2=___________ '
"P 1" shows Program 1 Is selected.
If you have labelled the disc, the bank edit
mode appears. Press (® (PLAY MODE) to
display "P 1" above.
To select Program 2, press (® (—►)
repeatedly until "P 2" appears.
2 Press ® (<— ) or ® (— ►) to select the
track slot number where you want to
insert a track.
Track slot number
CD2
:3 2 PI -m
±: ------ ’trWIITtMfn'Iinilllli
3 Press either side of ( seek / ams ) to select
the track you want to insert.
4 Press ® (ENTER) momentarily to enter
the track. '
The current track in that slot number and
the succeeding tracks shift down.
To continue inserting tracks, repeat steps 2
through 4.
The track currently registered 4n slot 6 of
Program 1.
3 Press ® (ENTER) for two seconds.
When you erase a track from a slot number,
the succeeding tracks shift up to fill the gap.
DEL
--- PI .06
CD2 ■* "«i
4 ?:P1 .06;
_________ P lay wooi —»■ M i M t I ^
4 To continue erasing tracks, repeat steps
2 and 3.
5
When you finish erasing tracks, press ®
(PLAY MODE) for two seconds.
6 Press (SHIFT).
Q!||
n
o
Z
o
n
3“
0)
3
0)
Note
Once all 12 slots have been filled, “*Mem Full*"
appears in the display, and you cannot insert tracks.
5 When you finish inserting tracks, press
® (PLAY MODE) for two seconds.
6 Press (SHIFT).
17