Sony RM-V40 - Manual (Page 3)

Remote Button Descriptions
Operating a Cable box
Operating a TV
T) To turn on and off.
2 To change the input mode.
[ 3 ] To change the channel. For
example, to change to channel
5, press 0 and 5 (or, press 5
and ENTER.)
m To display the current channel
on TV.
H To enter the selection.
To move the cursor to the left.
m To move the cursor downward.
[8] Volume up: +
Volume down: -
[9] To light up the Commander's
buttons. (The light will
automatically turn off if no
button is pressed for more than
10 seconds.)
[TÔ1 To mute the volume on the TV.
Press again to turn muting off.
M Set to TV (AVI or AV2/CBL on
which the TV is assigned).
UH To set up the Commander.
Q To operate SLEEP function on
the TV. (Works only for a TV
with the SLEEP function.)
H To change the channel. For
example, to change to channel
5, press 5 and ENTER.
15 To call up the MENU display
16 To move the cursor upward
17 To move the cursor to the right
3 Channel up: +
Channel down: -
(Ï1 To operate JUMP,
FLASHBACK or CHANNEL
RETURN function on the TV
depending on the setting of the
TV's manufacturer.
T] To turn on and off.
2^ To set up the Commander
2 To change the channel. For
example, to change to channel
5, press 0 and 5 (or, press 5 and
ENTER.)
SI To light up the Commander's
buttons. (The light will
automatically turn off if no
button is pressed for more than
10 seconds.)
[U Set to AVI or AV2/CBL on
which the cable box is assigned.
[6] To change the channel. For
example, to change to channel
5, press 5 and ENTER.
in Channel up: +
Channel down: -
[8] To operate JUMP,
FLASHBACK or CHANNEL
RETURN function on the TV
depending on the setting of the
TV's manufacturer.
Notes
• There may be cases you may turn
on/off the cable box by pressing the
CH+ or CH-buttons on the
Commander.
* If your cable box can control
volume, be sure to set its volume
control to a medium position. If the
volume on the cable box is turned
down completely, you will not be
able to adjust your TV's volume
with the Commander.
Operating a VCR Operating a DBS tuner
To turn on and off.
To change the input mode.
To change the channel. For
example, to change to channel
5, press 0 and 5 (or , press 5
and ENTER.)
To display the on-screen menu
(Sony VCR only).
To rccord,«press ► while
pressing #.
First release ►, then release •.
To pause
To rewind
To play
To stop
To light up the Commander's
buttons. (The light will
automatically turn off if no
button is pressed for more than
10 seconds.)
Set to VCR (AVI or AV2/CBL
on which the VCR is assigned)
To set up the Commander.
To change the channel. For
example, to change to channel
5 ,
press 5 and ENTER.
To fast-forward
Channel up: -f
Channel down: -
m To turn on and off.
[
2 ] To switch the output of the
DBS receiver to the TV.
(When you connect a TV cable
or antenna to the receiver, the
output switches between a TV
and DBS program.)
To bring up the Master Guide.
To scroll through the Master
Guide.
[ 5 ] To light up the Commander's
buttons. (The light will
automatically turn off if no
button is pressed for more than
10 seconds.)
[6] Set to DBS (AVI or AV2/CBL
on which the DBS is assigned).
[ t 1 To select the channel that's
highlighted.
To bring up the Station Index
when a program guide is not
displayed.
[S] Channel up: +
Channel down: -
To page through the guide
when a program guide is
displayed
[ 9 ] To tune to the last tuned
station.