Sony ICF-C120 - Manual (Page 2)

Radio Operation How to Set the Clock
1
Set the function selector switch to RADIO ON.
2
Select the desired band.
3
Tune in the desired station.
4
Adjust the volume.
To turn off the radio, set the function selector switch to OFF.
For Improved Reception
FM: Extend the FM wire antenna fully to increase the FM
sensitivity.
AM: Since the reception is affected by the direction of the
radio, rotate the unit horizontally for optimum reception.
1
Connect the AC power cord
to a wall outlet.
Figures will appear and begin to
flicker.
2
Adjust the clock to the
current time with the TIME
SET buttons, H (hour) and M
(minute), while holding the
ALARM/CLOCK set switch to
the CLOCK side.
Example: To set to 8:15 AM
AM12:00 = midnight
PM12:00 = noon
----- v-tL
»“JL •
n
T 8: nn
LI LI
i
U
™ u •
III-
1 _l
Note: The minutes digits advance to “00” after “59”. The hour
digits advance none.
Zero Second Adjustment
If you want to adjust the time exactly to the second with a
radio or a telephone time signal, proceed as in the following
Example.
Example: To set to 7:15 AM
1
Adjust the time indication to 1 : 'W| as described before.
2
While holding the ALARM/CLOCK set switch to ALARM,
press the SLEEP button. (The time display indicates the
minute one’s digit and the seconds.) Then, continuing to
hold the ALARM/CLOCK switch to ALARM, press the H
button simultaneously with a radio or telephone time signal.
The clock will begin to operate, showing the precise time of
day.
If the time display still indicates |”! ~ l : ‘S'| when the
ALARM/CLOCK set switch is released, advance the minute­
digit to 15 by pressing the M button once while holding the
ALARM/CLOCK switch to CLOCK.
Example: When the current time is 7:15:10 a m. the display
will become:
"i- (C-
/• I _l
II I
l U
TT
Minute Second dioits