Specifications, Cd/dvd player, Signal format system – Sony DVP-S330 User Manual
Page 55: Audio characteristics, Frequency response, Signal-to-noise ratio, Harmonic distortion, Dynamic range, Wow and flutter, Outputs and inputs
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Specifications
CD/DVD player
Laser
Semiconductor laser
Signal format system
NTSC
Audio characteristics
Frequency response
DVD (PCM 96 kHz); 2 Hz to 44 kHz (±1
dB)*
DVD (PCM 48 kHz): 2 Hz to 22 kHz (±0.5
dB)
CD: 2 Hz to 20 kHz (±0.5 dB)
Signal-to-noise ratio
More than 110 dB (LINE OUT (AUDIO 1,2)
connectors only)
Harmonic distortion
Less than 0.0025%
Dynamic range
More than 100 dB (DVD)
More than 97 dB (CD)
Wow and flutter
Less than detected value
(±0.001% W PEAK)
Outputs and Inputs
Jack
type
Output
level
Load impedance
LINE OUT
(AUDIO 1,2)
Phono
jacks
2 Vrms
(at 50 kilohms)
Over 10 kilohms
DIGITAL OUT
(OPTICAL)
Optical
output
connector
-18 dBm
Wave length: 660 nm
DIGITAL OUT
(COAXIAL)
Phono
jack
0.5 Vp-p
75 ohms terminated
LINE OUT
(VIDEO L 2)
Phono
jacks
1.0 Vp-p
75 ohms,
sync negative
S VIDEO OUT
(1,2)
4-pin
mini DIN
Y: 1.0 Vp-p
C: 0.286 Vp-p
75 ohms,
sync negative
75 ohms terminated
General
Power requirements
120V AC, 60 Hz
Power consumption
14 W
Dimensions (approx.)
430
X
95
X
305 mm
(17
X
3 3 / 4 x 1 2 in.) (w/h/d)
incl. projecting parts
Mass (approx.)
3.3 kg (7 lb 4 oz)
Operating temperature
41°F to 95°F
(5“C to 35°C)
Operating humidity
5% to 90%
Supplied accessories
See page 7.
*
The signals from LINE OUT (AUDIO 1 , 2 ) connectors are
measured. When you play the PCM sound tracks with 96 kHz
sampling frequency, the output signals from the DIGITAL OUT
(OPTICAL, COAXIAL) are converted to 48 kHz (sampling
frequency).
Design and specifications are subject to change without notice.
>
a
a.
s
5
‘
3
SL
3
H
i
0
3
fil
r*
o'
3
55