Sony DVP-S330 - Manual (Page 46)

Settings for Sound (AUDIO SETUP)
I
i/i
(D
a
s
to
I/I
01
3
a
>
c'
Wl
r*
3
<0
3
Select "AUDIO SETUP" after pressing SET UP.
"AUDIO SETUP" allows you to set the sound according
to the playback conditions.
Default settings are underlined.
AUDIO SETUP
AUDIO AH: OFF
AUDIO DRCr STANDARD
TRACK SELECTION:
OFF
DOWNMIX; DOLBY SURROUND
DIGITAL OUT:
ON
-• DOLBY DIGITAL: D-PCM
DTS: OFF
To set. Dress BBSS, then I enter I .
To quit, pressiSETUPi.
■AUDIO ATT (attenuation)
Selects the setting of the output from the LINE OUT
(AUDIO 1, 2) connectors according to the audio
equipment to be connected.
• OFF: turns off the audio attenuation.
• ON: reduces the audio output level so that no sound
distortion occurs.
Note
The setting does not affect the output from the DIGITAL OUT
OPTICAL and COAXIAL cormectors.'
■AUDIO DRC (Dynamic Range Control)
Makes the sound dear with the volume turned down at
night, etc., when you play a DVD. This affects the output
from the DIGITAL OUT connectors only when "PCM" in
"DIGITAL OUT" is set to "ON," and it affects the output
from the LINE OUT (AUDIO 1,2) connectors.
• STANDARD: Normally select this position.
• TV MODE: makes the low sound clear even if you
turned the volume down, so it is good for playing at
night. It is especially recommended when you listen to
the sound using the speakers of the TV.
• WIDE RANGE: It gives you the feeling of being at a live
performance. When you use high quality speakers, it is
more effective.
Note
When you play DVDs without the AUDIO DRC function, the
effect on the sound may be difficult to hear.
■TRACK SELECTION
Gives the sound track which contains the highest number
of the channels priority when you play a DVD on which
multiple audio formats are recorded. If multiple audio
channels are recorded in PCM, DTS or Dolby Digital
format, the higher-numbered channel audio recorded in
PCM, DTS or Dolby Digital format is played.
• OFE : No priority given.
• AUTO : Priority given.
Notes
• When you set this item to "AUTO", the language may change
depending on the "AUDIO" settings in "LANGUAGE SETUP."
The "TRACK SELECTION" setting has higher priority than
that of "AUDIO" settings in "LANGUAGE SETUP" (page 41).
• If you set "DTS" in "AUDIO SETUP" to "OFF", the DTS sound
track is not played even if you set this item to "AUTO" and the
highest-numbered channel audio is recorded in DTS format.
• If PCM, DTS and Dolby Digital sound tracks have the same
number of the highest channels, the player selects PCM, DTS
and Dolby Digital sound tracks, in this order.
• Depending on the DVD, the audio with priority may be
predetermined. In this case, you cannot give priority to the
DTS or Dolby Digital format by selecting "AUTO."
■DOWNMIX*
Switches the mixing down methods when you play a
DVD on which 3 or more channels in Dolby Digital
format is recorded.
IXDLBY SURROUND: when the player is connected to
an audio component that conforms to Dolby Surroimd
(Pro Logic).
• NORMAL: when the player is connected to a normal
audio component.
• The setting affects the following connectors:
-LINE OUT (AUDIO 1,2) connectors
-DIGITAL OUT (OPTICAL, COAXIAL) connectors.
46