Sony DVP-S330 - Manual (Page 12)

5.1 Channel Surround Hookups
0
1
VI
ST
«
a
With DVDs which contain DTS or Dolby* Digital sound,
you can enjoy the sorround sound while producing the
effect of being in a movie theater or a concert hall, using a
digital component with a built-in DTS or Dolby Digital
decoder (not supplied). The player outputs the surroimd
sound signals from the DIGITAL OUT OFTICAL and
COAXIAL connectors.
Required cords
Audio cords (not supplied)
One for the LINE OUT AUDIO jacks
White (L)
Red (R)
Optical or coaxial digital cord (not supplied)
One for the DIGITAL OUT jacks
White (L)
Red (R)
c O d -
^ IIIIIZ
-cO>
or
S video cord (supplied)
One for the S VIDEO OUT jacks
Setups for the player
Some setups are necessary for the player depending on
the components to be cormected.
Use the setup display to change the various settings.
For details on using the setup display, see page 38.
• When you play a DVD or CD that are recorded in
DTS format
Set "DIGITAL OUT" in "AUDIO SETUP" to "ON" and
then set "DTS" to "ON" in the setup display, (page 48)
• When you play a DVD that is recorded in Dolby
Digital format
Set "DIGITAL OUT" in "AUDIO SETUP" to "ON" and
then set "DOLBY DIGITAL" to "DOLBY DIGITAL" in
the setup display, (page 47)
Notes
• Refer to the instructions supplied with the component to be
cormected.
• When you do not connect an audio component with a built
in DTS decoder, do not set "DTS" to "ON."
• When you do not connect an audio component with a built
in DOLBY DIGITAL decoder, do not set "DOLBY DIGITAL" to
"DOLBY DIGITAL."
EEZUliBD- - ce O b
Coimect the component via the DIGITAL OUT OPTICAL or
COAXIAL connector using an optical or coaxial digital
connecting cord (not supplied). You do not need to cormect both
of these cords. See the figure on the next page.
Notes
• Do not connect the power cord to an AC outlet or press the
POWER switch before completing all cormections.
• Refer to the instructions supplied with the component to be
connected.
• The cord cormectors should be fully inserted into the jacks.
Loose cormection may cause hum and noise.
• Jacks and plugs of the cormecting cords are color-coded as
follows:
Red jacks and plugs: Right audio channel
White jacks and plugs: Left audio channel
Manufactured under license from Dolby Laboratories.
"Dolby", "AC-3", "Pro Logic" and the double-D symbol □□ are
trademarks of Dolby Laboratories.
Confidential Unpublished Works. ©1992-1997 Dolby
Laboratories, Inc. All rights reserved.
12