Sony RM-PP401 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

H]
SLEEP button
Press repeatedly to activate the sleep function and the
duration which the receiver turns off automatically.
SLEEP key operation on this remote commander is not
available for model STR-DE425. Please use SLEEP key
on the seFlo activate this operation.
Note that the function buttons are factory-set as
described in the table above. If you want to change
the factory setting of the buttons to match your
particular components, do the procedure “Changing
the Factory Settings of a Function Button" on page 12.
I
SYSTEM STANDBY switch
Press to turn off the receiver and other audio/video
components at the same time.
1
AV 1/6 switch
Press to tùrn the audio and video component^ on or
off.
] Function buttons
Press one of the buttons to select the component you
want to use. When you press a button, the receiver
and the selected component turn on. If the component
does not turn on, press the power switch on the
component.
To select
Press
VCR
ViDEOl (VCR mode 3), VIDE02
(VCR mode 1), or VIDE03 (VCR
mode 2p'
DVD player
DVD
TV, DBS tuner, or LD
player**^
TV
Tape deck
TAPE
MD deck
MD
CD player
CD
Built-in tuner
TUNER
Turntable
PHONO
the component connected
to the 5.1/DVD INPUT
jacks on the receiver
5.1 IN
a) Sony VCRs become operable when you press the VIDEO!, 2, or
3 button. These buttons correspond to VHS, Beta, and 8mm,
respectively.
b) TV or DBS tuner (Direct Broadcasting Satellite): USA,
Canadian, and Australian models only
TV or LD player: Models for all countries except the USA,
Canada, and Australia
Notes
• Before you turn on the receiver, make sure that you have
turned the MASTER VOLUME control on the receiver to
the leftmost position to avoid damaging your speakers.
• After you have selected VCR or DVD player, turn on the
TV and set the TV's video input to match the component
you selected.
I
MASTER VOLUME +/- buttons
Press to adjust the volume level of all speakers at the
same time.
If you have pressed the TV CONTROL button:
Press to adjust the volume level of the TV speakers.
I
MUTING button
Press to mute the sound. The indicator to the left of
the MUTING button on the receiver lights up when
the sound is muted.
If you have pressed the TV CONTROL button:
Press to mute the sound from the TV.
fii
3
a
«
i
o
o
•o
A
See the table on page 10 for information on the buttons
you can use to control each component.