Sony LBT-G2500 - Manual (Page 22)

(continued)
7
To program additional tracks,
repeat steps 4 through 6.
Skip slop 4 to select tracks from the same
disc.
8
Press C> on the CD player.
All the tracks play in the order you
selected.
To cancel Program Play
Press PLAY MODE repeatedly until
"PROGRAM" or "SHUFFLE" disappears
from the display.
player's memory even after it has been playi
Press to play the same program agaitr.
» tf appears instead of the total playing t
while programming, this means:
- you have programmed a track numbered O'
20, or
- the total playing time has exceeded 100 min
To Press
Check the program CHECK on the remote
repeatedly. After the
last track, "CHECK
END" appears.
Clear the last selected
track CLEAR on the remote
in stop mode.
Clear a specific track CHECK on the remote
repeatedly until the
number of the track to
be cleared appears, then
press CLEAR.
Add a track to the
program 1 Press DISC SKIP to
select a CD,
2 Turn the jog dial to
select a track.
3 Press PLAY MODE.
Clear the entire
program ■ once in stop mode or
twice while playing.
22