Sony CDP-CX57 - Manual (Page 20)

Playing CDs
6 To program other discs/tracks, do the following;
To program Repeat Steps
All tracks of another disc(s) 2 to 4
Other tracks on the same disc 4 and 5
Other tracks on other discs 2 to 5
Erasing the program stored in memory
1 Press PLAY MODE repeatedly in the stop mode
until "PROGRAM" appears in the display.
2 Hold down CLEAR until "CLEAR" appears in the
display.
7
Press O to start Program Play.
To cancel Program Play
Press CONTINUE.
Checking the programmed order
You can check your program before or after you start
playing.
Press CHECK.
Each time you press this button, the display shows the
disc and track number of each step in the programmed
order. (When a whole disc is programmed as one step,
"ALL" appears instead of the track number.) After the
last step in the program, the display shows "- END
and returns to the original display.
Changing the programmed order
You can change your program before you start playing.
To You need to
Erase a track or disc Press CHECK until the track or
disc you do not want appears in
the display, then press CLEAR
Erase the last track or
disc in the program Press CLEAR. Each time you
press the button, the last track or
disc will be cleared.
Add tracks or discs to the
end of the program Follow the programming
procedure
Change the whole
program completely Hold down CLEAR until
"CLEAR" appears in the display
to erase the whole program, then
create a new program following
the programming procedure
Playing Your Favorite Disc
Independently (Plus One Play)
when you insert a disc into the PLUS ONE slot, you
can play the disc independently from other discs.
The play mode you have selected (except for Program
Play) remains active even if you use this function.
Front cover
PLUS ONE
1 Open the front cover.
2 Press PLUS ONE.
The indicator on the PLUS ONE button lights up.
The PLUS ONE slot comes to the loading position.
(Continued)
19