Two Brothers Racing Polaris RZR 900 - Manual (Page 4)

ITBR001-309 www.twobros.com 2011 Polaris RZR XP900 - 4
7. Attach the connectors from the Juice Box Pro to the stock wiring harness as
shown in Figure D.
Figure D
Figure E
8. Using the supplied posi-tap, connect the grey wire
from the Juice Box Pro to the green wire of the stock
Throttle Position harness as shown in Figure E.
The TPS is located on the left side of the throttle
bodies. Figure E was taken with the air box removed
which does make this step easier although not
necessary.
9. Using the supplied zip ties, secure the harness in
place making sure it will not make contact with the
exhaust.
10. Reinstall the panel.
11. Replace the seats.