Two Brothers Racing Kawasaki Teryx - Manual (Page 3)

ITBR001-224 2008-10 Kawasaki Teryx - 3
Fi
gu
re
A
Fi
gur
e B
Fi
gu
re
C
remove
remove
Juice Box Pro
harness
The ignition must be turned OFF before installation.
1 Remove the seats.
2 Remove the engine cover as shown in Figure A.
3 Remove the two plastic pins securing the frame cover.
The frame cover is located under the drivers seat as shown in Figure B.
4 Remove the frame cover.
5 Route the Juice Box Pro harness from the battery area and go underneath the frame
towards the engine as shown in Figure C.