Two Brothers Racing Can-Am Spyder Spyder RS - Manual (Page 3)

ITBR001-283-A.02 www.twobros.com 2011-2014 CanAm Spyder RT - 3
1. Open the seat and the front storage compartments.
2. Remove the two covers under the front storage lid as shown in Figure A.
Remove the push pins.
3. Remove the lower cover in Figure B by pulling outwards.
4. Remove the mirror by pulling outwards and up.
5. Remove the upper side cover.
The two silver bolts circled in Figure B do NOT need to be removed. Pull
outwards in this area.
6. Remove the inner side cover as shown in Figure C.
Figure C is shown with the lower side panel removed. This panel does NOT need
to be removed to perform steps 5 and 6.
7. Repeat steps 3 through 6 for the right hand side.
FIG
.A
FIG
.B
FIG
.C