Castelle FAXPRESS PREMIER 61-1260-001A - Manual (Page 9)

About the Premier Server Setup
7
administration and fax transaction utility. (See Installing the
Administrator Client in the Administrator’s Guide.)
7. Activating the FaxPress Premier 3.0 software with the Activation
Key. (See Activating the Premier Software on page -7 in this
manual.)
8. Configuring the Premier server’s Line Settings, Dialing Proper-
ties, Email settings, and PBX/DID settings (Analog) or DNIS set-
tings (Digital) using Faxmain. (See
Configuring the FaxPress
Premier in the Administrator’s Guide.)
9. Sending and receiving a test fax using one of the three generic,
pre-created FaxPress Premier accounts (Supervisor, Guest and
Unaddressed) to confirm the Premier is operational. (See
Send-
ing a Test Fax in the Administrator’s Guide.)
10. Installing the FaxPress Premier Client for Users on the user work-
stations. (See Installing the Premier User’s Clienht in the
Administrator’s Guide.)
11. Creating and configuring new FaxPress Premier users. (See Cre-
ating and Configuring Premier User Accounts and Importing
and Mapping Users in the Administrator’s Guide.)
12. (Highly Recommended) Activating the FaxPress Premier Backup
service guarantees user files and data are protected should any
unexpected system damage or failure occur. (See the
Premier
Backup and Restore chapter in the Administrator’s Guide.) Cas-
telle cannot take responsibility for any data lost should system
problems occur.
Activating the Premier Software
The FaxPress Premier 3.0 software must be activated with a Software
Activation Key, determined by your FaxPress Premier unit's serial
number, to enable the Premier client software and associated FaxPress
Premier Email Gateways to function.
To use the Faxmain utility to access Castelle's Activation Key request
page and obtain your Software Activation Key, follow these steps: