Castelle FAXPRESS PREMIER 61-1260-001A - Manual (Page 26)

Getting Started
24
Using Remote Desktop
Microsoft’s Remote Desktop feature, enabled by default on the FaxPress
Premier, allows you to access the Premier’s Embedded Windows
operating system from any other network workstation with Remote
Desktop installed. The Remote Desktop feature is installed by default on
Windows XP machines, and is optional on other Windows operating
systems. See your Microsoft documentation for information on using
Remote Desktop.
The FaxPress Premier allows two remote desktop sessions at a time.
Only two administration sessions can be active at the same time.
To set the Premier IP address using Remote Desktop, follow these steps:
1. From any network workstation with Remote Desktop enabled, go
to Start>All Programs>Accessories>Communications>
Remote Desktop Connection.
2. In the Remote Desktop Connection Screen , in the Computer
field, enter the FaxPress Premier’s current IP address.
3. Click Connect .
4. Enter Administrator in the Windows screen’s User Name field,
and castelle in the Password field. Make sure castelle is all
lower case.
The monitor, now functioning as a remote terminal for the Premier’s
system, will display the Premier’s system rather than the local system
attached directly to the monitor.
Changing the Premier’s IP Address Using
Remote Desktop
To change the Premier’s IP address using Remote Desktop, first use
Remote Desktop as described above to connect to the Premier’s
Windows system, then go to
Start>Settings>Control
Panel>Administrative Tools>Network and Dialup
Connections>Local Area Connection Properties>Internet Protocol
(TCP/IP) Properties.