Tri-Tronics Sport Upland G3 - Manual (Page 8)

Page 10 Page 9
Receiver Light
(“Fuel Gauge”)
Flashes twice per second every four
seconds when the collar is turned on.
This light will be:
Green when the batteries are full.
Amber when the batteries are partly discharged.
Red when the batteries need charging very soon.
Rapid red flashing means the batteries are completely dead and
the unit will not function. Note that it takes 20 seconds after collar
turn-on for the light to register battery level.
Collar Strap Retaining Loops
(“Belt Loops”)
The receiver has three belt loops for excellent collar strap
attachment with no gap. Insert the collar strap through all three
belt loops and snug the strap against case. See the section
“Fitting the Collar on the Dog” for more information.
Battery Pack Access Screws
Remove these two screws to remove the battery pack. Position
the new pack in place and replace the screws. (Note: The battery
pack does not need to be removed for charging.)
Very important: Do not remove or tamper with any internal labels that
are visible when the battery pack is removed. Doing so will void your
warranty. The receiver serial number label is a seal that maintains
waterproof integrity of the receiver.
Do not use the collar strap “belt loops” to attach a leash to. They are not
designed for this use
The receiver is waterproof.