Clarion WXZ466MP - Manual (Page 28)

28
WXZ466MP
280-8171-00
English
DVD changer
If an error display other than the ones described above appears, press the reset button. If the problem
persists, turn off the power and consult Clarion dealer.
9. ERROR DISPLAYS
If an error occurs, one of the following displays is displayed.
Take the measures described below to eliminate the problem.
ERROR 3
ERROR 4
ERROR 6
ERROR 2
ERROR 3
ERROR 6
ERROR 2
ERROR 3
ERROR 6
ERROR P
ERROR R
Measure
A DISC cannot be played due to scratches,
etc.
A foreign object is pinched in the DISC slot,
or the shutter is damaged due to opening
the shutter forcibly, etc.
A DISC is loaded upside-down inside the
CD deck and cannot play.
A DISC inside the CD changer is not loaded
properly.
A DISC inside the CD changer cannot be
played due to scratches, etc.
A DISC inside the CD changer cannot be
played because it is loaded upside-down.
A DISC inside the DVD changer is not
loaded properly.
A DISC cannot be played due to scratches,
etc.
A DISC inside the DVD changer cannot be
played because it is loaded upside-down.
Parental level error
Region code error
Replace with a non-scratched disc.
Remove the object inside the slot. If there is
no foreign object or the situation is not
improved in spite of removing it, please
consult Clarion dealer.
Eject the disc then reload it properly.
This is a failure of CD changer’s mechanism
and consult Clarion dealer.
Replace with a non-scratched disc.
Eject the disc then reload it properly.
This is a failure of DVD mechanism and con-
sult Clarion dealer.
Retry or replace with a non-scratched disc.
Eject the disc then reload it properly
Set the correct Parental level.
Eject the disc and replace correct region
code disc.
CD/MP3
DVD changer
Cause Error Display
CD changer
+WXZ466MP-009-ENG 05.9.13, 10:50 28