Clarion WXZ466MP - Manual (Page 22)

22
WXZ466MP
280-8171-00
English
CD changer functions
When an optional CD changer is connected
through the CeNET cable, this unit controls all
CD changer functions. This unit can control a to-
tal of 2 changers.
Turn the [SOURCE] knob and select the CD
changer mode to start play. If 2 CD changers
are connected, turn the [SOURCE] knob to se-
lect the CD changer for play.
∗ If “NO MAG” appears in the display, insert the maga-
zine into the CD changer. “DISC CHECK” appears
in the display while the player loads (checks) the
magazine.
∗ If “NO DISC” appears in the display, eject the maga-
zine and insert discs into each slot. Then, reinsert
the magazine back into the CD changer.
Note:
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
Procedure to scroll a title
Set “SCROLL” to “ON” or “OFF”.
(The factory default setting is “ON”. Refer to the
subsection “Setting the method for title scroll”
in the section “ Common Operations ”.)
●When set to “ON”
The title is automatically kept scrolling.
●When set to “OFF”
To scroll just 1 time when the title was changed
or you press and hold the [TITLE] button for 1
second or longer.
Selecting a CD
Press the [DIRECT] buttons to select the de-
sired disc.
∗ The [DIRECT] button is valid only when correspond-
ing disc indicator is turned on.
Selecting a track
●Track-up
1. Turn the [SEARCH] knob right to move
ahead to the beginning of the next track.
2. Each time you turn the knob right, the track
advances ahead to the beginning of the next
track.
●Track-down
1. Turn the [SEARCH] knob left to move back
to the beginning of the current track.
2. Turn the knob left twice to move to the begin-
ning of the previous track.
Fast-forward/fast-rewind
●Fast-forward
Turn the [SEARCH] knob right for 1 second or
longer.
●Fast-rewind
Turn the [SEARCH] knob left for 1 second or
longer.
CD Changer Operations
7. OPERATIONS OF ACCESSORIES
CD-ROM discs cannot be played from every
CD changer, it’s depended on the model.
Pausing play
1. Press the [SEARCH] knob to pause play.
“PAUSE” appears in the display.
2. To resume play, press the [SEARCH] knob
again.
Displaying CD titles
This unit can display title data for CD-text CDs
and user titles input with this unit.
●When connected to CDC655Tz or DCZ625
1. Press the [DISP] button to select the title dis-
play.
2. Each time you press the [TITLE] button, the
title changes in the following order:
User title (user) ➜ CD-text title (disc) ➜
Artist name ➜ CD-text title (track) ➜ User
title (user)…
Notes:
• If the CD playing is not a CD-text CD or no user
title has been input, “NO TITLE” appears in the
display.
• If a CD-text CD is not input its disc title or a track
title, “NO TITLE” appears in the display.
CAUTION
+WXZ466MP-009-ENG 05.9.13, 10:50 22