Sound Anchors DL5 system - Manual (Page 9)

Page 9 of 28
Misc. on the DESKLINE ® DL5/DL6 system
This system is a DESKLINE system developed for desks and for indoor use in offi ces. Do not use it in industrial
kitchens or in other enviroments that have to be cleaned with aggressive detergents.
Do not bolt the legs to the fl oor so that free movement is prevented. This could cause serious damage to the
legs in fault situations.
Warranty
There is a 36 months’ warranty on the DESKLINE products against manufacturing faults from the production
date of the individual products (see label).
LINAK A/S’ warranty is only valid in so far as the equipment has been used and maintained correctly and has not
been tampered with. Furthermore, the system must not be exposed to violent treatment. In the event of this,
the warranty will be ineffective/invalid. For further details, please see LINAK A/S ordinary conditions of sale.
Maintenance
Clean dust and dirt on the outside of the system at appropriate intervals and inspect them for damage and
breaks.
Inspect the connections, cables, and plugs and check for correct functioning as well as fi xing points.
Service of double-insulated products:
Class II
A Class II or double insulated electrical appliance is one which has been designed in such a way that it does
not require a safety connection to electrical earth (US: ground).
The basic requirement is that no single failure can result in dangerous voltage becoming exposed so that it
might cause an electric shock and that this is achieved without relying on an earthed metal casing. This is
usually achieved at least in part by having two layers of insulating material surrounding live parts or by using
reinforced insulation.
There is no earthing/grounding means provided on the product, and no earthing/grounding means is to be
added to the product.
In Europe, a double insulated appliance must be labelled “Class II”, “double insulated” or bear the double
insulation symbol (a square inside another square).
Servicing a double-insulated product requires extreme care and knowledge of the system, and is to be done
only by qualifi ed service personnel. Replacement parts for a double-insulated product must be identical to the
parts they replace.
The cleaners and disinfectants must not be highly alkaline or acidic (pH value 6-8).