Strand class i eye splice – Samson 16-STRAND Class I Eye Splice User Manual
Page 2
PAGE 2 OF 3
SamsonRope.com
| Tel
+1.360.384.4669
16-Strand Class I Eye Splice
S A M S O N S P L I C I N G I N S T R U C T I O N S
5
step
p e r f o r m i n g s p l i c e
m a r k i n g ta i l s
5
A
Insert fid into rope at Mark B and
out at Mark D.
5
b
Pull tail through body of rope from
B to D.
5
D
Continue to pull the tail end of the rope
through until Mark A and Mark B coincide.
5
c
As each marked strand pair is about to
be buried in the rope at Mark B, carefully
cut each strand in the marked pair.
mark c
mark c
mark d
mark d
mark B
mark B
mark a
Cut as strand
pairs are
about to
be buried
Emerging
wire fid
6
step
6
A
Smooth rope from eye at Mark B, back to
Mark D to remove all slack in the braid.
6
b
Smooth rope from knot to Mark C to bury
as much of the core yarns as possible.
6
c
Mark both cover tail and core yarns where
they exit from the body of the rope.
mark c
mark d
mark B
Mark tail and
core strands
where they exit
rope
core yarns
tail
- PowerBrite Pro7 (16 pages)
- Pro Rack-Mount Power Distribution PB15 (16 pages)
- S. phantom S Class (32 pages)
- C03 (8 pages)
- 3-STRAND Class I Eye Splice (1 page)
- 3-STRAND Class I Long Splice (2 pages)
- 3-STRAND Class I Rope-to-Chain Splice (2 pages)
- 8-STRAND Class I End-for-End Splice (3 pages)
- 8-STRAND Class I Eye Splice (3 pages)
- 8-STRAND Class II End-for-End Splice (3 pages)
- 8-STRAND Class II Eye Splice (3 pages)
- 8x3-STRAND Class II End-for-End Splice (3 pages)
- 8x3-STRAND Class II Eye Splice (3 pages)
- 12-STRAND Class I End-for-End Splice (2 pages)
- 12-STRAND Class I Eye-and-Eye Tail Splice (3 pages)
- 12-STRAND Class I Eye Splice (2 pages)
- 12-STRAND Class I Eye Splice Modified for Quik-Splice (2 pages)
- 12-STRAND Class I Whoopie Sling Modified for Tenex and Tenex-TEC (2 pages)
- 12-STRAND Class II End-for-End Splice (2 pages)
- 12-STRAND Class II End-for-End Splice Modified for Dirty, Used Rope (4 pages)
- 12-STRAND Class II Eye Splice (2 pages)
- 12-STRAND Class II Tuck-Bury End-for-End Splice (3 pages)
- 12-STRAND Class II Tuck-Bury Eye Splice Modified for HMPE (3 pages)
- 12-STRAND Class II Tuck-Bury Eye Splice Modified for Saturn-12 (3 pages)
- 12-STRAND Class II Whoopie Sling Modified for AmSteel and AmSteel-Blue (2 pages)
- DOUBLE BRAID Class I Back Splice (2 pages)
- DOUBLE BRAID Class I End-for-End Splice (4 pages)
- DOUBLE BRAID Class I Eye Splice (4 pages)
- DOUBLE BRAID Class I Eye Splice Modified for Used Rope (4 pages)
- DOUBLE BRAID Class II End-for-End Splice (2 pages)
- DOUBLE BRAID Class II End-for-End Splice Modified for Turbo-37 (4 pages)
- DOUBLE BRAID Class II Eye Splice (3 pages)
- DOUBLE BRAID Class II Eye Splice Modified for TS-II and TS-II Premium (5 pages)
- DOUBLE BRAID Class II Eye Splice Modified for TS-II Turbo (8 pages)
- DOUBLE BRAID Class II Eye Splice Modified for Turbo-37 (5 pages)
- DOUBLE BRAID Class II Tips for Stripping the Cover (4 pages)
- DOUBLE BRAID Special Tips for Splicing Double Braid (1 page)
- DOUBLE BRAID Special Tips for Splicing Double Braid Used Rope (1 page)
- ROUND PLAIT Class I End-for-End Splice (2 pages)
- ROUND PLAIT Class I Eye Splice (3 pages)
- MISCELLANEOUS Lock Stitching, Whipping, and Seizing Procedures (2 pages)
- MISCELLANEOUS Smooth Ice/Flavored Ice Cover Installation (3 pages)
- MISCELLANEOUS Tools Required for Splicing (2 pages)