Roadi RDT55 - Manual (Page 9)

OWNER S MANUAL
,
OBD2 CODE SCANNER
7
3). " "”-- A flashing UP Arrow indicates additional information is available on
the previous screen.
4). "
Pd" -- Identifying a Pending DTC when viewing DTCs.
2.5 Keyboard
No solvents such as alcohol are allowed to clean the keypad or display.
Use a mild nonabrasive detergent and a soft cotton cloth.
Do not soak the keypad as the keypad is not waterproof.
2.6 Power
The external power of the scan tool is provided via the vehicle Data Link
Connector (DLC). just follow the steps below to turn on the scan tool.
1). Connect the OBD II Cable to scan tool.
2). Find DLC on vehicle.
A plastic DLC cover may be found for some vehicles and you need to
remove it before plugging the OBD2 cable.
3). Plug OBD II Cable to the vehicle's DLC.
2.7 Product Setup
The scan tool allows you to make the following adjustments and settings.
1). Contrast adjustment: Adjusts the contrast of the LCD display.
2). Display Test: Tests the LCD display.
3). Keyboard test: Tests the keyboard.
To enter the setup menu mode
1). From the keyboard: Press and hold the N button for at least 3 seconds
until the
System Setup. menu shows up. Follow the instructions to make
adjustments and settings as described in the following setup options.
System Setup
======================================
1) Contrast
2) Display Test
3) Keyboard Test
4) Unit of Measure