Pro-Tools 105B - Manual (Page 19)

FAQ’s
Q: WHAT SIZE MATERIAL CAN I BEND WITH THE BRUTE?
A: UP TO 2 ½”x .134 WALL STEEL TUBE AND 2” SCHEDULE 40 PIPE.
Q: THE TUBE IS STUCK IN THE BENDER?
A: SNUG THE TENSION BOLT ON THE QUICK RELEASE, THEN BACK OFF THE RAM.
Q: CAN I UPGRADE THE HYDRAULIC CYLINDER?
A: NO. THE HYDRUALIC CYLINDER IS PERFECTLY MATCHED FOR THE BEST RESULTS.
Q: CAN I CHOOSE WHICH HYDRAULIC PUMP I WANT?
A: YES THE MB-105-SB WILL WORK WITH EITHER AIR OR ELECTRIC PUMPS.
Q: IS THE BRUTE BENDER ONLY HYDRUALIC OR CAN I USE IT MANUALLY?
A: IT CAN ONLY BE USED HYDRAULICALLY DUE TO ITS SIZE AND ENGINEERING. IT
WOULD TAKE A GRET DEAL OF LEVERAGE TO USE MANUALLY.
Q: THE CYLINDER IS NOT SEATED CORRECTELY IN THE BLOCK. CAN I RETURN IT?
A: UNFORTUNATELY NO. WE DO NOT WARRANTY THE THREADS ON ANY PRODUCT
WE SELL OR MANUFACTURE.
Q: HOW DO I LIMIT THE SCRATCHES ON THE MATERIAL I AM BENDING?
A: TO LIMIT DAMAGE TO MATERIAL MAKE SURE YOUR MATERIAL & DIE IS WIPED
CLEAN AND DEBURRED. MAIN DIE STAYS DRY!! LUBRICATE BACKING BLOCK ONLY!
DELRIN BACKING BLOCK IS AVAILABLE FOR ANODIZED ALUM. OR POLISHED SS.
813-986-9000
PAGE 19
PRO-TOOLS