Pro-Tools 105B - Manual (Page 11)

105-SB BENDER
-IMPORTANT-
813-986-9000
PAGE 11
PRO-TOOLS
RADIUS OF MAIN DIE MUST BE CLEAN. ABSOLUTELY NO GREASE!
TIGHTEN TENSION BOLT SO TUBE
WILL NOT SLIP. BE CAREFUL NOT
TO OVER-TIGHTEN & DAMAGE TUBE.
CHECK THESE ITEMS BEFORE STARTING TO BEND.
FOR A FRICTION FREE BEND, ALWAYS
LUBRICATE THE BACKING BLOCK. ALL
PURPOSE WHEEL BEARING GREASE
WORKS VERY WELL.
NOTE:
YOUR BACKING BLOCK
HAS “TOP” STAMPED ON
IT. THIS MUST ALWAYS
FACE UP.
****BACKING BLOCKS WILL VARY IN SHAPE & DESIGN. ABOVE IS ONE EXAMPLE.****