General settings, Specifications, Service – Pro-Ject Audio Systems Remote Box S User Manual
Page 12: Warranty, Copyright
12
General Settings
The menu item „General“ of the settings menu allows some general
configurations: „Setup Wizard“ starts the setup process all over again,
“Restore” brings the app to the factory default condition. In both cases all
programmed IR commands and all settings are irrevocably lost.
Specifications
uSB connector:
Type A socket for configuration of the Remote Box S with a computer
output for infrared repeater: (Socket B) 3,5mm jack plug socket
outboard power supply:
9V/2A Dc; 220 - 240V, 50Hz
Power consumption:
1,5W
Dimensions W x H x D:
103 x 36 x76mm
Weight:
380g without power supply
configuration program
for Windows: ProJect.WlAnconfig.Windows.exe
(available for download
for linux (from Kernel 2.4.26 / 2.6.5): ProJect.WlAnconfig.jar
at www.audiotra.de):
for mAc: Driver FTDIuSBSerialDriver_v2_2_16.dmg
and ProJect.WlAnconfig.jar
A wireless network (WlAn) is necessary for the operation of the Remote Box S.
For the configuration program, Java has to be installed on the respective computer (preferable the newest
version, please activate the automatic update function in Java).
Service
Should you encounter a problem which you are not able to alleviate or identify, please contact your dealer for
further advice. only when the problem cannot be resolved there, the unit should be sent to the responsible
distributor in your country.
Warranty
The manufacturer accepts no responsibility for damage caused by not adhering to these instruction
manual. Modification or change to any part of the product by unauthorized persons release the
manufacturer from any liability over and above the lawful rights of the customer.
Copyright
PRo-JEcT is a Registered Trademark of
H. lichtenegger.
This guide was produced by: Audio Trade GmbH
copyright © 2011. All rights reserved.
The information was correct at the time of going to
press. The manufacturer reserves the right to make
changes to the technical specification without prior
notice as deemed necessary to uphold the ongoing
process of technical development.