beautypg.com

Front turn signal, sidemarker and daytime, Running lamps -54 – Cadillac 2006 Escalade User Manual

Page 368

background image

Front Turn Signal, Sidemarker and
Daytime Running Lamps

A. Low-Beam

Headlamp

B. Daytime Running

Lamp (DRL)

C. Sidemarker Lamp

D. High-Beam

Headlamp

E. Front Parking/Turn

Signal Lamp

To replace a front turn signal, sidemarker or DRL bulb,
do the following:

1. Remove the headlamp assembly as described

previously. See Headlamps on page 5-50 for
more information.

2. Remove the rubber, circular-shaped bulb cap for

the affected bulb from the headlamp assembly.

3. Press the locking release lever, turn the bulb socket

counterclockwise and remove it from the headlamp
assembly. (There is no lock for the sidemarker lamp.)

4. Remove the old bulb from the bulb socket.

5. Put the new bulb into the bulb socket.

6. Put the bulb socket into the turn signal housing and

turn it clockwise until it locks. (There is no lock for
the sidemarker lamp.)

7. Reverse the steps to reinstall.

5-54

This manual is related to the following products: