Cooper Lighting Envoy - Manual (Page 6)

5
6
I N S T A L L A T I O N
[1] Install “Quick Mount” plate
[2] Loop hook, hang fixture and make
wiring connections
[3] Guide the wires into center access
hole. Swing up and slide fixture onto
bracket hooks. When “click” is heard,
installation is complete.
[4] A C C E S S + I N S P E C T I O N + R E M O V A L
Other garage fixtures force you to remove the
lens and ballast cover to access the
connections within the junction box. Envoy’s
“quick release” mechanism allows access with
the simple act of sliding an external lever. No
need to undo your work if you need to inspect
connections. Slide the lever in and push the
fixture away to lower the luminaire and
inspect electrical connections.
[5] M A I N T E N A N C E
All of the fundamental tasks, including
re-lamping, inspection and fixture
removal, are achieved without the use
of tools. Toolless latches allow the user
easy access to the lens and electrical
compartments. By unlatching two latches,
the lens swings out of the way and is self-
retained during service and relamping. The
“quick release” system allows the user to
remove the fixture by sliding the lever in,
pushing away and lowering the luminaire,
removing the electrical connections and
finally removing the fixture off the
mounting plate. This is especially useful
when servicing or replacing fixtures and
allows service to take place without having
to block or shut down driving lanes for
extended periods of time.
S I M P L E , E F F I C I E N T A N D S E C U R E .
Envoy’s “quick mount + release” attachment mechanism is standard on all fixtures and may be used with standard 4" J-Boxes and Envoy’s multiple
mounting accessories. A positive audible “click” is heard which signals the fixture is firmly secured and locked into place.
INSTALLATION + MAINTENANCE
[1]
[3] [4]
[2] [5]