Cooper Lighting ACT-2285S User Manual
Cooper Lighting Furniture
Type:
Project:
RSA LIGHTING 9660 - 9700 TOPANGA CANYON BLVD. CHATSWORTH CA. 91311
TOLL FREE: 800-356-3030 • 818-349-3030 • FAX: 818-349-3031 • www.rsalighting.com
©2004 RSA Lighting All Rights Reserved • Specifications subject to change without notice.
AC16
5” Lensed Wallwasher Square Trim
w/ Integral Linear Spread Lens
Insulated Ceiling Housing - 7.5” Height
12V Bi-Pin Base MR16 Lamp 50 Watts Max.
Item #
Description
Finish
Voltage / Wattage
ACT-2285WH / ACT-953-IC
ACT-2285BK / ACT-953-IC
ACT-2285S / ACT-953-IC
ACT-2285SS / ACT-953-IC
ACT-2285PM / ACT-953-IC
Accurus Series Lensed Wallwasher Square Trim with
Insulated Ceiling Housing w/ Magnetic Transformer
White
Black
Silver
Stainless Steel
Primer
12V / 50W Max.
ACT-2285WH
ACT-2285BK
ACT-2285S
ACT-2285SS
ACT-2285PM
w/ ACT-953-IC Housing
Steel Safety
Cable
17.50"
14.13"
7.50"
9.88"
MDL
Hanger Bars extend from
14” to 25.25” max.
Housing adjusts in
plaster frame to accommodate
various ceiling thicknesses.
Magnetic
Transformer
Perforated flap for
secure drywall
installation
5.00"
SQ.
2.00"
SQ.
DESCRIPTION:
Recessed square trim for wallwash appli-
cations. Includes linear spread lens.
Housing accommodates various ceiling
thicknesses.
ELECTRICAL:
120V input, 12V output. Junction box is
U.L. listed for through branch wiring.
CONSTRUCTION:
Housing and plaster frame: 18 gauge CRS
Trim ring, j-box and hanger assemblies:
16 gauge CRS.
SYSTEM PROTECTION:
Thermal protection provided to guard
against overheating and misuse of insula-
tion over and around fixture.
• WASHES VERTICAL SURFACE WITH EVENLY
DIFFUSED LIGHT
• DESIGNED TO BE INSTALLED WITHIN 18” -
24” OF VERTICAL SURFACE
• INCLUDES LINEAR SPREAD LENS
Trim detail shows fixture trim
below the ceiling line.
STATE OF WASHINGTON AIRTIGHT APPROVED
For 277 volt transformer add “277” to end of item #.For
Chicago Plenum add “CP” to end of item #.
REV 062904
Suitable for Damp Location. For 277 Volt Transformer, add '277' to the end of the
catalog number. For Chicago Plenum, add 'CP' to the end of the catalog number.