Clarion VZ309 - Manual (Page 23)

VZ309 3
English
XM Radio Operations
This functtion is available when XM Radio
receiver is connected through the dedicated
connections. Listeners can subscribe to
XM
® Radio on the Web by visiting
www.xmradio.com, or by calling
(800) 97-34. Customers should have
their Radio ID ready. (see “Displaying the
Identification (ID) Code”).
Customers can receive a limited number
of free-to-air channels without activation.
Selecting XM Radio mode
1. Press the
[SRC] button on the front panel
or remote control to switch to the SAT source.
INFORMATION ON THE SCREEN:
1. SAT Channel/Category Name
. SAT Channel Number
3. SAT Band
4. Time Clock
5. Artist and Title Information
. Current Preset Channels
7. Source Indicator
Displaying the Identification (ID) Code
To display the radio ID, press the [OPT]
button on the front panel three times or
use the
[ ] tuning button to tune to
channel “000”. The screen displays the
radio ID where the channel name is usually
displayed.
Band selection
Press the [BAND] button to change between
three SAT bands (SAT 1, SAT and SAT3).
Each band stores up to six preset stations.
Station selection
Press the [ ] [ ] button to tune to
another station.
Preset mode
Six numbered preset buttons store and recall
stations for each band. The stored stations
(P1 -P) for the current band can be viewed
on the screen. Use the remote control
[ ] [ ]
up/down arrow buttons to scroll through the
preset station list.
Storing a Station
1. Select a band (if needed), then select a
station.
. Press and hold a preset button (numbers 1-)
on the front panel or remote control.
3. The preset number and station is displayed
and highlighted.
Recalling a Station
1. Select a band (if needed).
. Press a front panel or remote control preset
button (numbers 1-) to select the
corresponding stored station.
Channel Search
To access Channel Search mode, press the
[OPT] button on the front panel. The list of all
available channels appears on the screen.
1. Rotate the rotary knob on the panel or press
the
[ ] [ ] up/down arrow keys on the
remote control to navigate the list of channels.
. Press the the rotary knob or the [ENTER]
button on the remote control to select a
channel.
Category Search
To access Category Search mode, press the
[OPT] button on the front panel twice. The list of
available categories appears on the screen.
. Rotate the rotary knob or press the [ ] [ ]
up/down arrow keys on the remote control to
navigate the list of categories.
3. Press the rotary knob or the
[ENT] enter
button on the remote control to select the
desired category. A list of stations in the
selected category appears on the screen.