Louisville Tin and Stove HEDV254A User Manual
Page 2

Page 2
INTRODUCTION
THIS IS A GAS-FIRED DRAFT INDUCED, POWER DEPENDENT DIRECT VENT WALL FURNACE
THAT WILL OPERATE SAFELY AND PROVIDE AN EFFICIENT SOURCE OF HEAT WHEN
INSTALLED, OPERATED AND MAINTAINED AS RECOMMENDED IN THESE INSTALLATION
AND OPERATING INSTRUCTIONS. READ THESE INSTRUCTIONS THOROUGHLY BEFORE
INSTALLING, SERVICING, OR USING THE APPLIANCE. IF YOU DO NOT UNDERSTAND ANY
PART OF THESE INSTRUCTIONS CONSULT LOCAL AUTHORITIES, OTHER QUALIFIED
INSTALLER, SERVICE TECHNICIAN, THE GAS SUPPLIER OR THE MANUFACTURER.
SPECIFICATIONS AND DIMENSIONS
Your Direct Vent Wall Furnace is shipped complete in one carton. This carton contains the furnace, vent
cap, collector box, vent exhaust tube, air inlet tube, wall template with rough-in dimensions, installation
and operating instructions, and wall thermostat.
Introduction…………………………...….. 2
Specifications and Dimensions………….
2
Safety Rules………………………............. 3
Clearances…………………………..……. 4/5
Location…………………………..….…… 6/7
Installation…………………………...…… 7/9
Lighting Instructions……………….……
10
Burner Orifice………………………...….. 11
Removing Main Burner…....……………
11
Proper Burner Flame......…………………
11
Wiring Diagram..........……………………
12
Sequence of Operation…………...…….
13
Optional Kits……………………….……
14/16
Maintenance Instr./Service Record…...
17
Trouble Shooting...........………………..
18/19
Parts Drawing…….....…………………...
20
Parts List ............………………………...
21
Warranty....................................................
22
CONTENTS
Center
Model
Input
Type
Gas
Vent
MAX.
MIN.
No.
BTU/HR Weight
Width
Depth
Height
Control CFM
AMPS
Conn.
to Floor Wall
Wall
(Adj.) THICKNESS
NATURAL GAS
HEDV253A
25,000 100 Lbs.24-1/2” 9-3/4” 32-1/4” 24 V.
200
1.88
3/8”
12-1/2” 32”
5”
HEDV403A
40,000 120 Lbs.34-5/8” 9-3/4” 30-1/2” 24 V.
500
2.18
3/8”
12-1/2” 32”
5”
L.P. GAS
HEDV254A
25,000 100 Lbs.24-1/2” 9-3/4”
32-1/4” 24 V.
200
1.88
3/8”
12-1/2” 32”
5”
HEDV404A
40,000 120 Lbs.34-5/8” 9-3/4”
30-1/2” 24 V.
500
2.18
3/8”
12-1/2” 32”
5”
The State of Massachusetts requires that installation and service of a gas
appliance be performed by a plumber or gas fitter licensed in the
Commonwealth of Massachusetts.