Dell PowerVault MD3820f - Manual (Page 66)

Stop Virtual Disks Copy Command
The Stop Virtual Disks Copy command provides the ability to abort a Virtual Disks copy operation that is
in-progress. To stop a Virtual Disks copy:
1. Select an existing Virtual Disks copy pair that is in-progress.
2. Click Stop Virtual Disks Copy command.
3. Choose OK to stop the operation or Cancel to continue the Virtual Disks copy operation.
Changing Virtual Disk Copy Parameters
To change the target voume to read-write or change the modification priority:
1. Select an existing Virtual Disk copy pair from the list.
2. Click Change Virtual Disks Copy Parameters.
The Change Virtual Disks Copy Parameters dialog box is displayed.
3. From the Copy Priority drop-down box, select the new priority for the Virtual Disks copy.
Figure 53. Change Virtual Disks Copy Parameters
4. Uncheck Target Virtual Disks Read-Only to allow for read-write of the target Virtual Disks copy.
5. Click OK.
Synchronous Replication View
When the Remote Replication (Legacy) premium feature is enabled on the MD storage array, the Remote
Replication (Legacy) tab is displayed in the MD vCenter Plug-in. From this tab, existing synchronous
replication pairs are displayed which allows:
• Create Remote Virtual Disks Replication
• Remove Replicated Pairs
• Test Replication Communication
• Suspend Replication
• Resume Replication
• Change Replication Roles
66