Dell Mobile Computing Cart (Unmanaged) - Manual (Page 7)

888-24-232-W-01 rev.B • 10/13
7 / 13
ENGLISH
Monitoring mobile device power (Managed Carts only)
T he Power/Fault Status Indicator lights near the MCC top surface communicate the following conditions:
NOTE: Charge status of individual mobile devices can be seen directly on mobile devices.
White light, solid Power "ON"
White light, slow fl ash Zone is charging
White light, fast fl ash Zone is scanning
All Fast Flashing Overcurrent. Reset by removing excess devices
on aux outlet. Unplug and re-plug the cart.
Amber light, fl ashing Maximum temperature has been exceeded *
White light, solid Auxilary outlets in use
* When recommended temperature has been exceeded, power to the mobile
devices is terminated. Charging resumes once the temperature falls within an
acceptable operating range.
Power/Fault Status Indicator Signal Meaning
Zones
First-Time battery charge
NOTE: Before using the mobile devices for the fi rst time
or after they have spent some time in storage, ensure that the
mobile devices have a full (100%) charge.
Prior to fi rst-time use, allow the mobile devices to charge in the MCC for at least 2-3 hours before removing them for use.
Notebook Shelf Removal
a. Disconnect the Ethernet cable (Managed carts only).
b. Release the shelf by lifting up on the tab.
c. Pull shelf out.
a b
c