Dell Dimension 5100 - Manual (Page 67)

5. Slide the sliding plate toward the bottom of the computer and, without releasing the sliding plate, slide the Media Card Reader out through the front of
the computer.
6. Replace the drive panel .
7. Replace the computer cover .
Installing a Media Card Reader
1. Follow the procedures in " Before You Begin ."
2. Remove the computer cover .
3. Remove the drive panel .
4. Remove the Media Card Reader and bracket from its packaging and ensure that all of the screws are included.
1 sliding plate lever
2 sliding plate
3 Media Card Reader
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your
computer's electronic components. You can do so by touching an unpainted metal surface on the computer chassis.
1 Media Card Reader
2 screws (4)