Dell Inspiron 14 (N4050, Mid 2011) - Manual (Page 75)

System Board 75
Replacing the System Board
1 Follow the instructions in "Before You Begin" on page 9.
2 Slide the connectors on the system board into the slots on the computer
base.
3 Replace the two screws that secure the system board to the computer base.
4 Connect the display cable, speakers cable, audio-board cable, USB-board
cable, coin-cell battery cable, and AC-adapter cable to the connectors on
the system board.
5 Replace the processor. See "Replacing the Processor Module" on page 52.
6 Replace the thermal cooling assembly. See "Replacing the Thermal
Cooling Assembly" on page 50.
7 Follow the instructions from step 5 to step 6 in "Replacing the Hard Drive"
on page 35.
8 Replace the Mini-Card. See "Replacing the Mini-Card" on page 38.
1 screws (2) 2 system board
2
1