Dell Inspiron 14 (N4050, Mid 2011) - Manual (Page 66)

66 Display
Replacing the Display Panel
1 Follow the instructions in "Before You Begin" on page 9.
2 Attach the display cable to the back of the display panel.
3 Connect the display cable to the display-board connector and secure it
with the tape.
4 Turn the display panel over.
5 Align the screw holes on the display-panel bracket with the screw holes on
the display panel and replace the four screws (two on each side).
6 Align the screw holes on the display panel with the screw holes on the
display cover and replace the six screws.
7 Route the display cable and Mini-Card antenna cables through the routing
guides on the display hinges.
8 Connect the camera cable to the connector on the camera module. See
"Replacing the Camera Module" on page 70.
9 Replace the display bezel. See "Replacing the Display Bezel" on page 63.
10 Replace the display assembly. See "Replacing the Display Assembly" on
page 61.
1 tape 2 display-board connector
3 display cable
1
2
3