Dell PowerEdge VRTX - Manual (Page 20)

20 Using the CLI
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
Plasma\GSG\Plasma_UGUsing_CLI.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 3 / 6 /1 3 - FO R P R O O F O N LY
Configuring an Initial SSH Password
To configure an initial SSH password, enter the following commands:
Configuring an Initial HTTP Password
To configure an initial HTTP password, enter the following commands:
Configuring an Initial HTTPS Password
To configure an initial HTTPS password, enter the following commands:
Enter the following commands once when configuring use of a terminal, a
Telnet, or an SSH session, for an HTTPS session.
NOTE: In the Web browser, enable SSL 2.0 or greater for the page content to be
displayed.
NOTE: HTTP and HTTPS services require privilege level 15 access and connect
directly to the configuration level access.
Configuring Login Banners
Banners can be defined for each line, such as console and telnet) or for all
lines. They are disabled by default.
console(config)# aaa authentication login default line
console(config)# aaa authentication enable default line
console(config)# line ssh
console(config-line)# login authentication default
console(config-line)# enable authentication default
console(config-line)# password jones
console(config)# ip http authentication aaa login-authentication local
console(config)# username admin password user1 privilege 15
console(config)# ip http authentication aaa login-authentication local
console(config)# username admin password user1 privilege 15
console(config)# crypto certificate 1 generate key-generate
console(config)# ip http secure-server