Dell Vostro 330 (Early 2011) - Manual (Page 80)

Back to Contents Page
Dell Vostro 330 Owner's Manual
Removing The Middle Bezel
1. Follow the procedures in Before Working On Your Computer .
2. Remove the cover .
3. Remove the front stand .
4. Remove the system board shield .
5. Remove the screws that secure the middle bezel to the computer. The screws are marked M3 as shown in the
image below.
6. Work the middle bezel loose from the chassis.
7. If needed, carefully pry the middle bezel up a little, near the ports on the right side of the computer. The tabs on
the bottom of the middle bezel attach to the chassis here.