Dell Vostro 330 (Early 2011) - Manual (Page 129)

Back to Contents Page
Dell Vostro 330 Owner's Manual
System Setup Options
Main
The Main tab lists out the primary hardware features of the computer. The table below defines the function of each
option.
Advanced
The Advanced tab allows you to set various functions that affect the performance of the computer. The table below
defines the function of each option and its default value.
Security
The Security tab displays the security status and allows you to manage the security features of the computer.
Boot
System Information Displays the computer model number.
BIOS Version Displays the BIOS revision.
System Date Re-sets the date on the computer's internal calendar.
System Time Re-sets the time on the computer's internal clock.
Service Tag Displays the service tag of your computer.
Asset Tag Displays the asset tag of your computer.
Processor Information
Processor Type Displays the type of processor.
L2 Cache Size Displays the processor L2 cache size.
L3 Cache Size Displays the processor L3 cache size.
Memory Information
Memory Installed Displays the total computer memory.
Memory Speed Displays the memory speed.
Memory Technology Displays the type and technology.
Device Information
SATA 0 Displays the model number and capacity of the hard drive.
SATA 1 Displays the model number and capacity of the hard drive.
CPU Configuration
Hyper-threading Enable or disable processor hyper-threading. Default: Enabled
Multi Core Support Displays the number of active cores. Default: All
Limit CPUID Value Enable or disable the Limit CPUID Value feature. Default: Enabled
CPU XD Support Enable or disable the CPU XD feature. Default: Enabled
Intel Virtualization Technology Enable or disable the Intel Virtualization feature. Default: Enabled
Intel SpeedStep Enable or disable the Intel SpeedStep feature. Default: Enabled
System Configuration
Onboard Audio Controller Enable or disable the onboard audio controller. Default: Enabled
Onboard LAN Controller Enable or disable the onboard LAN controller. Default: Enabled
Onboard LAN Boot ROM Enable or disable the onboard LAN boot ROM. Default: Disabled
SATA Mode Allows you to choose the SATA operation mode. Default: AHCI
USB Controller Enable or disable the USB controller. Default: Enabled
DVMT/FIXED Memory Displays the total amount of DVMT/FIXED memory on the computer.
Power Management
AC Recovery Allows the computer to restore the AC power Loss. Default: Power Off
Remote Wake up Allows the computer to be remotely turned on. Default: Enabled
Auto Power On Enable or disable the computer to power on automatically. Default: Disabled
Post Behavior
NumLock Key Enable or disable the NumLock State light during POST. Default: On
Keyboard Error Report Enable or disable the Keyboard Error Report to be displayed during POST. Default: Enabled
Admin Password Status Specifies whether an admin password has been assigned.
Set Admin Password Allows you to set an admin password.
HDD Protection Allows you to set a Hard Drive password.