Dell Vostro 330 (Early 2011) - Manual (Page 137)

Back to Contents Page
Dell Vostro 330 Owner's Manual
Installing The System Board Shield
1. Connect the TV Tuner cable and IR Blaster cable to the system board.
2. Carefully tilt the system board shield and place it on the system board.
3. Replace the screws that secure the upper part of the system board shield.
4. Replace the single screw along the bottom edge of the system board shield.
5. Replace the front stand .
6. Replace the cover .
7. Follow the procedures in After Working Inside Your Computer .
Related tasks
Removing the System Board Shield