Dell Inspiron 14R (N4010, Early 2010) - Manual (Page 47)

2. Align the screw holes on the power button board with the screw holes on the palm rest and replace the two screws.
3. Adhere the power button board cable on the palm rest.
4. Turn the palm rest over.
5. Replace the palm rest (see Replacing the Palm Rest ).
6. Replace the keyboard (see Replacing the Keyboard ).
7. Replace the memory module(s) (see Replacing the Memory Module(s) ).
8. Replace the module cover (see Replacing the Module Cover ).
9. Follow the instructions from step 4 to step 5 in Replacing the Optical Drive .
10. Replace the battery (see Replacing the Battery ).
Back to Contents Page
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.