Hinge caps, Remove the hinge caps (see, Removing the hinge caps – Dell Inspiron 14R (N4010, Early 2010) User Manual
Page 25: Replacing the hinge caps

Hinge Caps
Removing the Hinge Caps
1.
Follow the instructions in
Before You Begin
.
2.
Remove the display assembly (see
).
3.
).
4.
Remove the display panel (see
5.
Remove the display hinges (see
6.
Press both sides of each hinge cap and lift the hinge caps out of the display hinges.
Replacing the Hinge Caps
1.
Follow the instructions in
Before You Begin
.
2.
Place the hinge caps on the display hinges and snap them into place.
3.
Replace the display hinges (see
).
4.
Replace the display panel (see
).
5.
Replace the display bezel (see
).
6.
Replace the display assembly (see
Replacing the Display Assembly
Back to Contents Page
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
1 hinge caps (2)
2 display hinges (2)