Dell Inspiron 14R (N4010, Early 2010) User Manual
Page 33
1.
Follow the instructions in
Before You Begin
.
2.
Align the screw holes on the I/O board with the screw holes on the computer base.
3.
Replace the three screws that secure the I/O board to the computer base.
4.
Connect the I/O board cable to the connector on the system board.
5.
Replace the middle cover (see
Replacing the Middle Cover
).
6.
Replace the display assembly (see
Replacing the Display Assembly
).
7.
Replace the palm rest (see
Replacing the Palm Rest
).
8.
Replace the keyboard (see
Replacing the Keyboard
).
9.
Replace the memory module(s) (see
Replacing the Memory Module(s)
).
10.
Replace the module cover (see
Replacing the Module Cover
).
11.
Follow the instructions from
step 4
to
step 5
in
Replacing the Optical Drive
.
12.
Replace the battery (see
Replacing the Battery
).
Back to Contents Page
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.