beautypg.com

Dell Dimension 3100C User Manual

Page 40

background image

 

1.

Follow the procedures in "

Before You Begin

."


 

2.

Reset the current CMOS settings:

a.

 

Locate the 3-pin CMOS jumper (RTCRST) on the system board.

b.

 

Remove the jumper plug from pins 2 and 3.

c.

 

Place the jumper plug on pins 1 and 2 and wait approximately five seconds.

d.

 

Replace the jumper plug on pins 2 and 3.

 

3.

Replace the

computer cover

.

 

4.

Connect your computer and devices to electrical outlets, and turn them on.

Back to Contents Page

 

NOTICE:

To connect a network cable, first plug the cable into the network wall jack and then plug the cable into the computer.

See also other documents in the category Dell Computers: