Canon CR-55 - Manual (Page 30)

26 Installing the Scanner
Turning the Power OFF
CAUTION
If the scanner will not be used for an extended period of time,
unplug the power cord for safety’s sake.
1
Exit the scanning utility.
2
Turn OFF the scanner.
The power switch is located on the lower left rear corner of the scanner. To
turn the scanner OFF, push the power switch to the left. When the power
indicator turns OFF, the scanner is OFF.
Note
• Exit the scanning utility before turning OFF the scanner. Turning OFF
the scanner before exiting the scanning utility can cause unstable
operation of the computer.
• Wait at least 10 seconds before turning the scanner back ON after it has
been turned OFF.
WARNING
If the scanner makes a strange noise, emits smoke or a strange
odor, becomes hot, or if the scanner does not operate at all even
though the power is ON, immediately turn the scanner OFF and
disconnect the power cord from the power outlet. Contact your
local authorized Canon dealer or service representative to have
the scanner serviced.